INPA BMW is error diagnosis software for BMW cars with functions of reading errors, deleting errors, checking, maintaining, etc. Join OBD TWO SCAN to learn more about INPA BMW in the article below.

I. BMW INPA software information

  • Software name: INPA BMW
  • Software version: 5.0.6
  • Operating system: Windows 7/10/XP
  • Language: English and German
  • Compatible hardware: INPA/Ediabas K+DCAN USB interface
Image 1: INPA BMW software

II. Functions of BMW INPA software

BMW INPA software is factory BMW diagnostic software. All systems and modules connected to a BMW vehicle read all BMW fault codes and provide live data, diagnostics and other functions.
– Inspection, production and after-sales
– ECU diagnostic data specifications
– Read and clear error memory
– Upload and download FLASH data
– Read measured value – Input/output control
– Calibration of single ECU variables
– Encoding of ECU -CAN (network area controller) variables simulates bus mode
– Integrated onboard/offboard solution
– Configure data communication and GUI quickly and simply instead of programming
– Client-specific protocols are supported
Image 2: INPA BMW software

III. Computer required

  • Operating system: Microsoft Windows XP, 7 (32/64bit), 8, 8.1 (32/64bit), 10 (32/64bit)
  • CD/DVD ROM drive
  • 1 available USB port (We recommend using the same USB port each time)
  • Minimum 1.2 GHz processor
  • Minimum 2GB RAM
  • Intermediate experience navigating Windows and installing software/drivers
  • Note: This mid-range configuration helps you install software that operates smoothly and stably

IV. List of vehicles covered by BMW INPA software

F series models
E60 (E61, E63, E64)/5er, 6er
E70 (E71, E72)/X5,X6
E90 (E01, E92, E93)/3er
Mini R56 (R55, R57)
Rolls Royce RR1 (RR2, RR3)
Rolls Royce RR4
Mini R50 (R52, R53)
E85 (E86)/Z4
E65 (E66, E67)/7er
Besides INPA, there are many other coding and programming software for BMW cars. Below are some software that you can refer to:
ISTA P: Use programming for E series vehicles
ESYS: Used to program and code the F/G/I series, specializing in turning on and off hidden features.
BMWAi5.0: Coding for F series vehicles
BMW Coding Tool: updated coding file for E series
NCS-Expert tool: decoding the control box on BMW E series cars
WinKFP: programming-flash control box on BMW E series cars

V. OBD TWO SCAN policy violation notices

OBD TWO SCAN Joint Stock Company

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.